$325 · Peavey KB5 Keyboard Amplifier 200W PA Bass

In beautiful shape, low hours, one owner, never left my house. Intended to be a keyboard amplifier this also makes a great compact PA system, all-around instrument amplifier, and I ended up using it most often with a fretless bass guitar. Very versatile and rugged. Has wheels and extendable cart handle. Available to demo at your convenience. Peavey's advertising blurb and specs below: ------------------------------- OVERVIEW Peavey continues its commitment to smart keyboard amplification. The KB 5 was designed as a personal PA system in a keyboard amp. The KB 5 features separate inputs on each channel and can easily handle voice, microphones and other instruments, including acoustic and electric guitars, drum machines and backing machines, such as CD and DAT players. Other essential features include stereo effects loop, ground lift, master level, XLR balanced stereo line out, DDT defeat switch and the capability to drive an external speaker. SPECIFICATIONS PREAMP SECTION The following preamp specs are measured @ 1 kHz nominal signal levels are with channel level controls set at 5 minimum levels are with channel level controls set at 10. Channel 1 2 and 3 inputs: Input Impedance: 100K Left/Mono Nominal Input Level: -22 dBV 79 mV RMS Minimum Input Level: -40 dBV 10 mV RMS Nominal Input Level: -15 dBV 178 mV RMS Minimum Input Level: -33 dBV 22 mV RMS Channel 4 input: Low Z Input Impedance: 5 k Ohms Nominal Input Level: -28 dBV 40 mV RMS Minimum Input Level: -48 dBV 4 mV RMS High Z Input Impedance: 100 l Left Nominal Input Level: -5 dBV 560 mV RMS Minimum Input Level: -22 dBV 79 mV RMS Right: -1 dBV 1.1 V RMS Minimum: -16 dBV 158 mV RMS Headphone output Load Impedance: 8 Ohms or greater Nominal Output: 100 mW RMS Main line out Output Impedance: <100 Output Level: 18 dBV POWER AMPLIFIER SECTION Rated power and load: 200 Watts RMS/4 Ohms or 150 Watts RMS/8 Ohms with DDT off (1 kHz, 1% THD @ 120 VAC line) Frequency response: +0, -1dB, 20Hz-20kHz @ 100 Watts RMS/ 8 Ohms Total harmonic distortion: Less than 0.01% @ 1 kHz/8 Ohms Typically less than 0.08% 20 Hz-20kHz DDT dynamic range: Greater than 20 dB DDT maximum THD: Below 0.5% THD for 6 dB overload Below 1% THD for 20 dB overload Hum and noise: Greater than 100 dB below rated power Power consumption: 300 Watts @ 120V AC 50/60 Hz domestic 300 Watts @ 220-230/240V AC 60 Hz export